Monday, January 4, 2010

Restoring the Original Light Fixtures: Part 2

I thought it would be a nice thing to post pictures of my process in case someone searching how to rewire lights stumbles across our blog. In particular this would apply to rewiring a table lamp, because I'm using the rayon cord and I don't show the ground wire. It is a very simple process and something anyone who is minimally handy can do. For those of you not interested, this is probably really boring. ;)



DISCLAIMER: I am not an electrician. I am rewiring our lights as a hobby. Please take on electrical projects at your own risk! Do your research. One thing to consider is that old fixtures are often not originally equipped with a ground wire. For safety purposes, a ground wire was added to our lights when they were installed (not pictured). If there is ever an electrical short in a metal fixture, it could become electrified and shock/harm a person who touches it (the person being the shortest path to the ground). Many everyday objects like table lamps, alarm clocks, toasters, etc don't have a ground (think two-prong vs 3-pronged plug). Hardwired fixtures should always be grounded.



So.... you may remember that a while ago I posted about the cleaning and paint removal from the original antique light fixtures in our house. First I removed all the old 1920s cloth wiring and stripped the paint off the brass. Antique looking parts are not hardware store material, so I had to order everything online. I bought almost all the replacement lamp parts from Grand Brass . I also got some brass darkening solution from Architecturals to patina the new brass fitter. A side note about buying lamp stuff online: I was thrilled to find a mogul socket reducer *geek* which makes it possible to use a standard light bulb in an antique lamp with a oversized mogul socket. I own two mogul floor lamps and the oversized bulbs are hard to find and are usually a bright 100 watts.

Originally I was thinking I might be able to reuse the original ceramic interior sockets (called fatboys because they are bigger than modern sockets). Some of them were quite corroded, so I decided to replace the interiors with modern parts and reuse the original exteriors for looks. I was able to find interior sockets with antique looking turn-key knobs, so they look pretty original! (I'm not throwing away the old ceramic sockets because I hate to discard anything original. They will just serve as art).

Side note: Modern hardwired fixtures often don't have a knob on the socket because they are controlled by a wall switch. It doesn't make a whole lot of sense to have knobs on my pendants but it's how it was done in the 1920s. Knobs on the pan chandeliers are actually useful because you can turn a few bulbs off for a makeshift dimmer.

Here is the basic order:
Old fixture, new wire, old fitter (aka shade holder), old exterior socket top, new cardboard insulator disc, new interior socket, new cardboard insulator, old exterior socket.



Here is a close up of the rayon wire. Inside the black and white rayon is a modern plastic coated wire. Most people would not go through the trouble of using cloth covered wire since these hang from the ceiling (rayon wire is usually used for table lamps), but we wanted to keep the look authentic.



Plain plastic lamp wire is easier to work with than this rayon covered plastic wire. I wasn't sure how the pros keep keep the rayon from unraveling, so I improvised by covering the ends of each wire with electrical tape. This will get brittle over time, but it's not serving an electrical function, it's just keeping the rayon from moving around.

At this point, the wire has been threaded through the end of the fixture chain, the fitter, the top of the exterior socket and the paper disc and I'm ready to attach it to the interior socket. This picture shows an "underwriter's knot". This knot prevents the wires from slipping off the screws if someone accidently yanks on the cord (standard wiring process).



Screw the wires onto the socket. Standard process is that black is hot so it goes on the gold screw. White is neutral and goes on the silver.



Once the socket is wired, you slide the cardboard insulator over it, ensuring to cover the screws so they don't short out on the exterior socket.



Then you slide the exterior socket over that, and it's ready to pop together with the top of the exterior socket.



Now it's time to screw the socket to the fixture chain end. I have not laced the other end of the wire up through the chain yet. This is because you want the wire to be free to twist with the socket at this time. The fitter gets turned too because the knob is sticking out the side.



Lace the wire up the chain after it's all screwed together and it's finished! I tested each lamp by jerry-rigging a plug by splicing the wires to a plug from a strand of Christmas lights. Yay, it works!



One finished pendant.



The finished bathroom sconce.



Next up... the Pan Chandeliers



The pan chandelier is basically four pendant lamps that are wired together. I wired each socket, then laced the wires up into the pan.

There is an additional length of wire that is laced down one of the chains from the ceiling. You attach all four lamp wires to this one wire.



Separate all the black wires from the white wires. (Note: It is recommended to use a heavier gauge wire if doing this sort of thing to a chandelier with lots of lights)



Twist the black wires all together and join them with a wire connector. This connection ensures that each bulb is connected to the main power, so all bulbs will work even if one burns out.



Lay the wires down in the pan so they are not visible when the chandelier is hanging.



TADA!

Along with a few other replacement parts the whole thing cost less than $100 to clean and rewire all the lamps. They are safe, they function, and they look a helluva lot better. We'll post pictures of them installed once the house is cleaned up and we put the pretty glass shades on!

9 comments:

  1. oooh aaaah.... those are beautiful! a lot of time and hard work well spent- good job. can't wait to see them in person. so excited for you guys...

    ReplyDelete
  2. How did you add the ground wire to the fixture? I know you didn't have a picture of it but I would be interested in seeing how you did it since I have to do the same thing. Thanks, Susan

    ReplyDelete
  3. @ Susan - Modern fixtures have a ground wire that is welded or screwed onto to a hidden part of the metal fixture. We ended up wrapping a bare copper wire around a threaded part of the fixture so when it was screwed together it held the ground wire in place.

    A ground wire provides the shortest path to the earth if there is ever a short in the electrical wiring and the metal fixture itself becomes electrified. In theory, if an entire fixture is made of metal that conducts electricity (mine are brass with steel chain), as long as the ground wire is attached somewhere to the metal fixture then it should be grounded when properly installed. On pendant fixtures it is recommended that you run the bare wire all the way down the chain.

    Again, I'm not an electrician but after much research I believe this to be safe. You could always pick something up at a thrift store to dissect it before working on your own fixture.

    Good luck!

    ReplyDelete
  4. Thanks for responding. I will thread the braided ground wire around the threaded part of the rod in the old 1920s fixture and screw a nut on over it to hold it down. Really appreciate you adding the additional comments. It is truly a help! Susan

    ReplyDelete
  5. I'm having trouble finding replacement knobs for an old mogul-base 3-way lamp switch. All I've found so far are current standard 4X36 thread ones, which are too small. Have you suggestions for a decent source?

    Thanks in advance.

    Ray

    ReplyDelete
  6. Ray,
    Check http://grandbrass.com/ or http://www.jalanes.com/
    I'd call and ask if they have any lying around... it could be the sort of thing they don't post online because it is unusual. If you can't find just the knob, you could buy a new mogul socket (~$15) and take its knob, assuming it fits your current socket (or switch out the whole socket). Good luck!

    ReplyDelete
  7. OMG you so saved my life I have been trying and trying to figure out how to rewire my old pieces. Everyone gives me their old lights cause I love them. They all need rewireing but can NEVER find anything this detailed. I have old books but they never have UL knots or pics I can blow up. Your pics were amazing and thank you for the reminder about grounding them I totally forgot!!!! Your home is amazing!

    ReplyDelete
  8. Thanks so much for posting this. I just recently purchased my first (of hopefully many) antique light fixture (which looks a lot like your 4 chain/pan version) and I was having a really hard time trying to figure out how to get the bell/socket off the fixture. I was able to see from the photos that it was threaded at the top. I've now taken it all apart and removed all the old wires. My ceramic/brass sockets look to be in excellent shape except for the cardboard inserts... JC

    ReplyDelete
  9. Thanks for the post! It was well written and I think you should write more on the topic. You gave me the confidence to make some vintage lighting for my new apartment.

    I like the steampunk look, so I'm going to take some antique plumbing, an old industrial pulley and an Edison light-bulb to make a lamp.

    I have a lot of research to do before I go messing around with wires, but your blog gave me the confidence to finally get started.

    ReplyDelete